Electronics Engineering Blogs
Stay up to date about electronics engineering.
The losses in transformer are listed below. Some of them occur due to alternating flux or due to ohmic resistance in the windings.
Whenever a signal is sampled below Nyquist rate (fs < 2B), the signal is called under sampled and the Aliasing effect hampers the results.
The Circular Convolution can be performed using two basic methods which are concentric circle method and matrix multiplication method.
The circuit which produces the samples of the input voltage and holds those values for a definite amount of time is sample and hold circuit.
An interrupt is a condition that arises during the working of a microprocessor. The interrupts of 8086 initiate interrupt service through ISR
The PLA consists of two programmable arrays, one of which is Programmable AND array and Programmable OR array
The Adaptive Delta Modulation technique helped to overcome the problem of granular noise in delta modulation.
UPS are used widely in order to receive a continuous supply when there is no main supply available.
The Routh Hurwitz’s Criterion states that the system is stable if and only if all the elements in the first column have same algebraic sign.
The three basic transistor configuration are CE, CB and CC. A transistor is a three terminal device Emitter, Base and Collector.
The DC Motor is an electrical machine which can be classified as Separately excited DC Motor, Permanent Magnet and Self excited DC Motor.
The state variables can be explained as a minimal set of states of a system which helps to determine behavior of the system.