Electronics Engineering Blogs
Stay up to date about electronics engineering.
What is Digital to Analog Converter?
The Digital to Analog converter is an electronic device which converts digital signal to analog signal. Weighted Resistor and R-2R Ladder are its types.
What is the CB Hybrid Model?
We use small signal transistor model to analyze h-parameters. A transistor can be treated as a two port terminal.
What is Block Diagram of TV Communication?
The block diagram of a TV communication system consists of a TV transmitter and a receiver. The transmitter consists of two units.
What is Minimum Mode Configuration of 8086?
The microprocessor 8086 minimum mode and maximum mode operation is decided by signal MN/MX’. When the signal MN/MX’ = 1 the 8086 minimum mode is active.
What is Boolean Algebra?
Boolean algebra which deals with variables and binary numbers. This algebra helps to simplify the Boolean variables
What are CE CB CC transistor configurations?
The three basic transistor configuration are CE, CB and CC. A transistor is a three terminal device Emitter, Base and Collector.
What is the Superposition Theorem?
Superposition theorem is applicable to circuits with linear elements. They are not applicable to power since it is a non-linear quantity.
What is Norton’s Theorem?
Norton’s equivalent is obtained by source conversion of Thevenin’s equivalent circuit. The short circuit current is then given as Isc=Vth/Rth
What are Clippers and Clampers?
The clipper circuits are basically used to clip the portion of any input signal without changing the remaining part of the input waveform.
What is a Watchdog Timer?
Watchdog timer is a hardware microcontroller. It is basically used to take out a system from an infinite loop and resets the system.
What are different Standards of Measurement?
These standards mainly represent the units of measurements which are close to the possible accuracy with help of present day technological.
What are Transducer?
Transducer is a device which converts physical quantity or energy of one form to signal or energy of another form.
What is the Aliasing effect?
Whenever a signal is sampled below Nyquist rate (fs < 2B), the signal is called under sampled and the Aliasing effect hampers the results.
What is Cell Splitting in mobile communication?
Cell splitting in mobile communication is the process in which the bigger cells split up into smaller ones.
Top 10 Jobs in Electrical and Electronics Engineering
Interested in Electrical and Electronics Engineering career? Check out this list of top 10 jobs in Electrical and Electronics Engineering.
What is the Convolution Theorem?
The convolution theorem states that the transform of convolution of f1(t) and f2(t) is the product of individual transforms F1(s) and F2(s).
What is 5G?
5G is the new technology in the field of cellular network. It is the technology with many advantages over the old generation of cellular networks.