Electronics Engineering Blogs
Stay up to date about electronics engineering.
Superposition theorem is applicable to circuits with linear elements. They are not applicable to power since it is a non-linear quantity.
The term human–computer interaction (HCI) is used widespread since early 1980s. Second World War provided impetus …
The Digital to Analog converter is an electronic device which converts digital signal to analog signal. Weighted Resistor and R-2R Ladder are its types.
The sampling theorem states that information contained in a signal is fully preserved in sampled form as long as the fs=2fm.
CMOS is a new type of MOSFET logic is made combining both the PMOS and NMOS processes and is called complementary MOS.
The State transition matrix is that matrix whose product with the state vector at initial time gives the value of variable x for time t.
5G is the new technology in the field of cellular network. It is the technology with many advantages over the old generation of cellular networks.
The circuit which produces the samples of the input voltage and holds those values for a definite amount of time is sample and hold circuit.
The main components of Phase Locked Loop are a phase detector with a voltage controlled oscillator. It also has loop filter feedback.
Nyquist Stability Criterion gives the frequency response as well as comments on the stability and the relative stability of the system.
The DC Motor is an electrical machine which converts mechanical energy into electrical energy. It works on the principle of induced emf.
In JK flip flop when both J=K=1 the output toggles as long as clock high. This makes the output unstable. This is called race around condition.