Electronics Engineering Blogs
Stay up to date about electronics engineering.
UPS are used widely in order to receive a continuous supply when there is no main supply available.
The Non-Conventional Energy Sources are those which are available for us at any time and are free of cost.
ZigBee forms the upper layer for control and sensor applications. It is built above IEEE 802.15.4.
The Switched mode power supply is abbreviated as SMPS is used to convert the regulated DC output voltage from unregulated DC or AC voltage.
A Servo motor is similar to an induction motor having two primary windings placed 90 degrees apart in magnetic position.
The state variables can be explained as a minimal set of states of a system which helps to determine behavior of the system.
TDMA (Time division multiple access) is used where there is no need for continuous transmission. Due to this it can be used instead of FDMA.
The amplitude of the carrier signal varies in accordance with the instantaneous amplitude of the modulating signal in Amplitude Modulation.
DC Potentiometer is an instrument which measures voltage, current and resistance. It can be used to calibrate ammeter and voltmeter.