Electronics Engineering Blogs
Stay up to date about electronics engineering.
Superposition theorem is applicable to circuits with linear elements. They are not applicable to power since it is a non-linear quantity.
The term human–computer interaction (HCI) is used widespread since early 1980s. Second World War provided impetus …
The Digital to Analog converter is an electronic device which converts digital signal to analog signal. Weighted Resistor and R-2R Ladder are its types.
CMOS is a new type of MOSFET logic is made combining both the PMOS and NMOS processes and is called complementary MOS.
Boolean algebra which deals with variables and binary numbers. This algebra helps to simplify the Boolean variables
Whenever a signal is sampled below Nyquist rate (fs < 2B), the signal is called under sampled and the Aliasing effect hampers the results.
Snubber Circuit is the one used for suppressing voltage spikes. These are energy absorbing circuits. RC circuits are basic snubber circuits.
The Delta Modulation has step size much smaller after quantization and also the sampling rate is much higher.
The precision rectifier has the capability of rectifying voltages which are of smaller magnitude than the forward voltage drop.
It is a DC motor which rotates in steps. After the electrical signal is fed to the motor, it starts to rotate in steps. The speed of the motor is dependent on the rate of input signal applied. The input applied to the motor decides the direction of rotation of the motor. The rotor is a permanent magnet which rotates.
Willing to get a job in this industry? Check us out, we have discussed ways how to land a job after Electrical and Electronics Engineering.
CMOS is a new type of MOSFET logic is made combining both the PMOS and NMOS processes and is called complementary MOS.