Goseeko blog


by Paurnima janrao


The capacitor is a tool wherein electric energy can be saved. It is an association of -conductor typically wearing charges of equal magnitudes and opposite signal and separated through an insulating medium. The non-conductive region can both be an electric insulator or vacuum such as glass, paper, air or semi-conductor called as a dielectric.

Capacitor vary in form and length, they have got many critical programs in electronics.

What are capacitors used for?

  • Storing electric powered capacity strength including batteries.
  • Filtering out undesirable frequency signals
  • delaying voltage changes while coupled with resistors.
  • Used as a sensing tool.
  • Used in the audio gadget of the automobile.
  • Used to split ac and dc.

One of the conductors has a tremendous charge +q and it’s miles at capacity +v. Whereas the opposite has an identical poor rate, -q and is at potential –v.

charge on capacitor:

charge at the capacitor is q.

Circuit symbols:


The charge at the capacitor (q) is without delay proportional to the capacity distinction (v) among the plates i.E. q = cv

The constant of proportionality (c) is called as the capacitance of the capacitor.

Dimensional system and unit of capacitance

unit of capacitance: farad (f)

The capacitor fee can range from a fragment of p.C.-farad to more than a micro farad. Voltage stage can variety from a couple to a tremendous couple of hundred thousand volts.

Dimensional components: m-1l-2i2t4

Normally used scales

μf = 10-6f

nf = 10-9f

pf = 10+2f

factors affecting the capacitance:

Capacitance depends on the following factors,

  • form and size of the conductor
  • medium between them
  • presence of other conductors close to it.


Types of capacitor:

Typically, capacitors are divided into two commonplace businesses:

  1. fixed capacitors
  2. variable capacitors

Constant capacitors are the ones capacitors with fixed capacitance values.

Whilst variable capacitors have the variable (trimmer) or adjustable (tunable) capacitance values.

Out of these the most critical institution is constant capacitors.

The crucial sorts of fixed capacitors are:

  1. ceramic capacitors
  2. film and paper capacitors
  3. aluminum, tantalum, and niobium electrolytic capacitors
  4. polymer capacitors
  5. supercapacitor
  6. silver mica, glass, silicon, air-gap, and vacuum capacitors

Many capacitors got their names from the dielectric used in them. However this isn’t always real for all capacitors due to the fact some antique electrolytic capacitors are named with the aid of its cathode creation. So the maximum used names are certainly ancient.

Fixed capacitors include polarized and non-polarized.

Ceramic and film capacitors are examples of non-polarized capacitors. Electrolytic and fantastic capacitors are covered within the group of polarized capacitors.

You may also like