Electronics Engineering Blogs
Stay up to date about electronics engineering.
Nyquist Stability Criterion gives the frequency response as well as comments on the stability and the relative stability of the system.
The registers are formed using a group of flip flops. The shift registers are mainly used for transferring data or storing multiple bits.
The State transition matrix is that matrix whose product with the state vector at initial time gives the value of variable x for time t.
Logic Gates are device with two or more inputs and only one output. There are different types of gates used to obtain different logical expressions.
The basic working of an induction motor is producing a rotating magnetic field and this field is sinusoidally distributed.
This instrument is called a Linear Voltage Differential Transformer.
Willing to get a job in this industry? Check us out, we have discussed ways how to land a job after Electrical and Electronics Engineering.
UART converts serial to parallel data on the transmitter side.
The Feedback amplifiers increase the signal strength by providing feedback back to the system at the input end.
An Analog to Digital converter is an electronic device which is used to convert analog signal into digital signal.
The losses in transformer are listed below. Some of them occur due to alternating flux or due to ohmic resistance in the windings.
The registers are formed using a group of flip flops. The shift registers are mainly used for transferring data or storing multiple bits.