Unit- I :
D.C. Circuits: Voltage and current sources, dependent and independent sources, Units and dimensions,
Source Conversion, Ohm’s Law, Kirchhoff’s Law, Superposition theorem, Thevenin’s theorem and their
application for analysis of series and parallel resistive circuits excited by independent voltage sources,
Power
& Energy in such circuits. Mesh & nodal analysis, Star Delta transformation & circuits.
Unit – II :
1- phase AC Circuits: Generation of sinusoidal AC voltage, definition of average value, R.M.S. value,
form factor and peak factor of AC quantity , Concept of phasor, Concept of Power factor, Concept of
impedance and admittance, Active, reactive and apparent power, analysis of R-L, R-C, R-L-C series &
parallel circuit
3-phase AC Circuits: Necessity and advantages of three phase systems, Meaning of Phase sequence,
balanced and unbalanced supply and loads. Relationship between line and phase values for balanced star
and delta connections. Power in balanced & unbalanced three-phase system and their measurements
Unit – III : Magnetic Circuits: Basic definitions, magnetization characteristics of Ferro magnetic
materials, self inductance and mutual inductance, energy in linear magnetic systems, coils connected in
series, AC excitation in magnetic circuits, magnetic field produced by current carrying conductor, Force on
a current carrying conductor. Induced voltage, laws of electromagnetic Induction, direction of induced
E.M.F.
Single phase transformer- General construction, working principle, e.m.f. equation, equivalent
circuits, phasor diagram, voltage regulation, losses and efficiency, open circuit and short circuit test
Unit IV:
Electrical Machines: Construction, Classification & Working Principle of DC machine, induction machine
and synchronous machine. Working principle of 3-Phase induction motor, Concept of slip in 3- Phase
induction motor, Explanation of Torque-slip characteristics of 3-Phase induction motor. Types of losses
occurring in electrical machines. Applications of DC machine, induction machine and synchronous
machine.
Unit V :
Basic Electronics: Number systems & Their conversion used in digital electronics, De morgan’s theorem,
Logic Gates, half and full adder circuits, R-S flip flop, J-K flip flop. Introduction to Semiconductors,
Diodes, V-I characteristics, Bipolar junction transistors (BJT) and their working, introduction to CC, CB &
CE transistor configurations, different configurations and modes of operation of BJT