REE4C003 Power Electronics

Module-I: Power switching devices
Diode, Thyristor, MOSFET, IGBT: I-V Characteristics; Firing circuit for thyristor; Voltage and current commutation of a thyristor; Gate drive circuits for MOSFET and IGBT.

Module-II: Thyristor rectifiers
Single-phase half-wave and full-wave rectifiers, Single-phase full-bridge thyristor rectifier with R- load and highly inductive load; Three-phase full-bridge thyristor rectifier with R-load and highly inductive load; Input current wave shape and power factor.

Module-III: DC-DC buck converter
Elementary chopper with an active switch and diode, concepts of duty ratio and average voltage, power circuit of a buck converter, analysis and waveforms at steady state, duty ratio control of output voltage.

Module-IV: DC-DC boost converter
Power circuit of a boost converter, analysis and waveforms at steady state, relation between duty ratio and average output voltage.

Module-V: Single-phase voltage source inverter
Power circuit of single-phase voltage source inverter, switch states and instantaneous output voltage, square wave operation of the inverter, concept of average voltage over a switching cycle, bipolar sinusoidal modulation and unipolar sinusoidal modulation, modulation index and output voltage Power circuit of a three-phase voltage source inverter, switch states, instantaneous output voltages, average output voltages over a sub-cycle, three-phase sinusoidal modulation

Books:
• M. H. Rashid, “Power electronics: circuits, devices, and applications”, Pearson Education India, 2009.
• N. Mohan and T. M. Undeland, “Power Electronics: Converters, Applications and Design”, John Wiley & Sons, 2007.
• R. W. Erickson and D. Maksimovic, “Fundamentals of Power Electronics”, Springer Science & Business Media, 2007.
• L. Umanand, “Power Electronics: Essentials and Applications”, Wiley India, 2009.

Power Electronics

Module-I: Power switching devices
Diode, Thyristor, MOSFET, IGBT: I-V Characteristics; Firing circuit for thyristor; Voltage and current commutation of a thyristor; Gate drive circuits for MOSFET and IGBT.

Module-II: Thyristor rectifiers
Single-phase half-wave and full-wave rectifiers, Single-phase full-bridge thyristor rectifier with R- load and highly inductive load; Three-phase full-bridge thyristor rectifier with R-load and highly inductive load; Input current wave shape and power factor.

Module-III: DC-DC buck converter
Elementary chopper with an active switch and diode, concepts of duty ratio and average voltage, power circuit of a buck converter, analysis and waveforms at steady state, duty ratio control of output voltage.

Module-IV: DC-DC boost converter
Power circuit of a boost converter, analysis and waveforms at steady state, relation between duty ratio and average output voltage.

Module-V: Single-phase voltage source inverter
Power circuit of single-phase voltage source inverter, switch states and instantaneous output voltage, square wave operation of the inverter, concept of average voltage over a switching cycle, bipolar sinusoidal modulation and unipolar sinusoidal modulation, modulation index and output voltage Power circuit of a three-phase voltage source inverter, switch states, instantaneous output voltages, average output voltages over a sub-cycle, three-phase sinusoidal modulation

Books:
• M. H. Rashid, “Power electronics: circuits, devices, and applications”, Pearson Education India, 2009.
• N. Mohan and T. M. Undeland, “Power Electronics: Converters, Applications and Design”, John Wiley & Sons, 2007.
• R. W. Erickson and D. Maksimovic, “Fundamentals of Power Electronics”, Springer Science & Business Media, 2007.
• L. Umanand, “Power Electronics: Essentials and Applications”, Wiley India, 2009.