Savitribai Phule Pune University, Maharashtra, Electronics and Telecommunications Semester 5, Microcontroller Syllabus

Unit - 1 Introduction To Microcontroller Architecture

Unit 1

Introduction to Microcontroller Architecture

1.1 Difference between microprocessor and microcontroller

1.2 Introduction to the Microcontroller classification

1.3 Feature and block diagram of 8051 and explanation

1.4 Program Status Word PSW

1.5 Overview of Instruction Set

1.6 Memory Organization

1.7 Interrupt structure

1.8 Timer and its modes

1.9 Serial communication concept of baud rate

1.10 Data transmission and reception using serial port

1.11 Sample programs of data transfer

1.12 Delay using Timer 01 and interrupt

1.13 IO Port Programming

1.14 All programs in C language

Unit - 2 IO Port Interfacing-I

Unit 2

IO Port InterfacingI

2.1 Pin diagram and its functioning Port structure

2.2 IO Interfacing Requirements

2.3 Interfacing of LED

2.4 Keys

2.5 Sevensegment multiplexed display

2.6 DAC 0808

2.7 ADC 0809 Stepper motor

2.8 Stepper motor

2.9 Relay

2.10 Buzzer

2.11 Optoisolators

2.12 Design of Data acquisition System DAS

2.13 All programs in C language

Unit - 3 PIC 18F XXXX Microcontroller Architecture

Unit 3

PIC 18F XXXX Microcontroller Architecture

3.1 Comparison of PIC family

3.2 Criteria for Choosing Microcontroller

3.3 Features

3.4 PIC18FXX architecture with generalized block diagram

3.5 MCU

3.6 Program and Data memory organization

3.7 Bank selection using Bank Select Register

3.8 Pin Out Diagram

3.9 Reset Operations

3.10 Watch Dog Timers

3.11 Configuration registers and Oscillator options CONFIG

3.12 Power Down modes

3.13 Brief summary of Peripheral support

3.14 Overview of Instruction set

Unit - 4 Peripheral Support In PIC 18FXXXX

Unit 4

Peripheral Support in PIC 18FXXXX

4.1 Timers and its Programming mode 0 1

4.2 Interrupt Structure of PIC18F With SFRS

4.3 PORTB change Interrupts

4.4 Use of timers with interrupts

4.5 CCP modes Capture Compare and PWM generation

4.6 DC Motor speed control with CCP

4.7 Block diagram of inbuilt ADC with Control registers

4.8 Sensor interfacing using ADC All programs in embedded C.

Unit - 5 Real Word Interfacing With 18FXXXX

Unit 5

Real Word Interfacing With 18FXXXX

5.1 Port Structure with Programming

5.2 Interfacing of LED

5.3 Interfacing of LCD

5.4 Interfacing of keyboard

5.5 Motion Detectors

5.6 DAC for generation of waveform

5.7 Design of PIC test Board

5.8 Debugging

5.9 Home protection System All programs in embedded C

5.10 Develop interfacing models according to applications

Unit - 6 Serial Port Programming Interfacing With 18FXXXX

Unit 6

Serial Port Programming interfacing with 18FXXXX

6.1 Basics of Serial Communication Protocol Study of RS232

6.2 RS485

6.3 I2C

6.4 SPI

6.5 MSSP structure

6.6 USART

6.7 Interfacing of RTC DS1307 with I2C

6.8 EEPROM with SPI

6.9 Design of Traffic Light Controller

6.10 All programs in embedded C