Become a data analyst in the next 4 months and kickstart your career. 100% placement assistance. Start your Analytics journey with our free Python course.
Savitribai Phule Pune University, Maharashtra, Electrical Engineering Semester 5, Electrical Installation, Design and Condition Based Maintenance Syllabus
Electrical Installation, Design and Condition Based Maintenance Lecture notes | Videos | Free pdf Download | Previous years solved question papers | MCQs | Question Banks| Syllabus
Get access to 100s of MCQs, Question banks, notes and videos as per your syllabus.
Try Now for free
Try Now for free
Unit - 1 Economics of Distribution Systems
Unit 1
Distribution Systems
1.1 Classification of supply system
1.2 Comparison between overhead underground System based on volume requirement
1.3 AC Distribution System Types of primary and secondary distribution systems calculation of voltage drops in ac distributors Uniform and Non Uniform Loading Numerical
1.4 Economic Choice of conductor size Kelvin’s Law
1.5 Design consideration of Distribution Feeders
1.6 Radial and ring types of primary feeder’s voltage levels
1.7 Energy losses in feeders
Unit - 2 Substation and Earthing
Unit 2
Substation and Earthing
2.1 Substation Classification of substations
2.2 Various equipments used in substation with their specifications
2.3 Bus bar arrangements in the substation Simple arrangements like single bus bar sectionalized single bus bar main and transfer bus bar system with relevant diagrams
2.4 Earthing Necessity of Earthing
2.5 Types of earthing system Equipment and Neutral and Maintenance Free Earthing system
2.6 Methods of testing earth resistance
2.7 Different electrode configurations Plate and Pipe electrode
2.8 Tolerable step and touch voltages Steps involved in design of substation earthing grid as per IEEE standard 80 – 2013
Unit - 3 Maintenance And Condition Monitoring
Unit 3
Maintenance and Condition Monitoring
3.1 Importance and necessity of Maintenance
3.2 Different maintenance strategies like breakdown maintenance plannedpreventive maintenance and condition based maintenance
3.3 Planned and preventive maintenance of transformer Induction motor and Alternators
3.4 Insulation stressing Factor
3.5 Insulation deterioration
3.6 Dielectric Absorption Ratio
3.7 Polarization Index PI
3.8 Concept of Condition monitoring of electrical equipment
3.9 Advance Tools Techniques of condition monitoring
3.10 Failure modes of Transformer
3.11 Condition monitoring of oil as per ISIEC
3.12 Filtrationrecondition of insulating oil
3.13 Condition monitoring of transformer bushings
3.14 On Load Tap Changer
3.16 Degree of polymerization
3.17 Induction motor fault diagnostic methods – Vibration Signature Analysis Motor Current Signature Analysis
3.18 HotLine Maintenance Meaning and advantages special types of nonconducting Materials used for tools for hot line maintenance
Unit - 4 Basics Of Estimation And Costing
Unit 4
Basics of Estimation and Costing
4.1 Purpose of Estimating and Costing
4.2 Qualities of Good Estimator
4.3 Essential elements of estimation and costing
4.4 Tender guidelines for inviting tenders
4.5 Quotation Price Catalogue Labour Cost
4.6 Schedule of Rates and estimating data
Unit - 5 Installation And Estimation Of Distribution System
Unit 5
Installation and estimation of distribution system
5.1 Introduction to Cable Sizing
5.2 Estimation and conductor size calculations of internal wiring for Residential and Commercial Numerical installations and estimate for underground LT service lines
Unit - 6 Testing And Electrical Safety
Unit 6
Testing and Electrical Safety
6.1 Understanding CAT Ratings Using CAT rated Instrument
6.2 Electrical Installation Testing Procedures Insulation resistance test between installation and earth Insulation resistance test between conductors Testing of polarity Testing of earth continuity paths and Earth resistance test
6.3 Contents of first aid box treatment for cuts burns and electrical shock
6.4 Procedures for first aid e.g. Removing casualty from contact with a live wire and administering artificial respiration.
6.5 Various statutory regulations Electricity supply regulations factory acts and Indian electricity rules of Central Electricity Authority CEA
6.6 Classification of the hazardous area Introduction to OSHA
Download EE Sem 5 syllabus pdf
Get access to 100s of MCQs, Question banks, notes and videos as per your syllabus.
Try Now for free
Try Now for free
Other Subjects of Semester-1
Share
Link Copied
More than 1 Million students use Goseeko! Join them to feel the power of smart learning.
Spot anything incorrect? Contact us
Goseeko covers the entire spectrum of student’s journey from Academics to Career. From helping them to ace their academics with our personalized study material to providing them with career development resources, our students meet their academic and professional goals.
Courses
B.E.
B.Com
B.A.
BBA
BMS
BSC
Resources
Notes
MCQ
Question bank
Audio bites
Express Class
Reference Videos
Solved Question Papers
